VOLLMER ONLINE ESTATE AUCTION

Registering & bidding on this auction confirms that you have read & agree to all terms as shown.

15% BP will be added to the final bid of each lot. 

Items are sold as is, where is.  No guarantees expressed or implied. Item descriptions are provided with the best information available at time of cataloging, but are in no way guaranteed.  Bidders should make there own determination of condition. 

Payment due at conclusion of auction. The credit card on file will be automatically charged upon the conclusion of the auction. Please be sure adequate funds are available. No items released until payment has been made in full.  No partial payments, no chargebacks, no refunds.  Items remaining unpaid after 48 hours may become the property of the auction company & may be resold. All payment must be made with the auction company. No payment accepted at load out site. 

Refer to full terms under the TERMS section of the auction listing. 

LOAD OUT BY APPOINTMENT: 
Tuesday, August 11, 12 pm - 6 pm
Wednesday, August 12, 9 am - 6 pm
These are the only dates/times available for load out. Please bid & plan accordingly.
Please use the link supplied in your post auction email to schedule your load out appointment. Buyers arriving without an appointment may have to wait.

Exact address will be shared with winning bidders on their invoices. 

Rear Tires 11.2-24, Front Tires 5.00x15, Belt Drive Pulley, 540 PTO, Runs and Drives

Rear Tires 14.9-28, Front Tires 5.50-16, 2- Rear Wheel weights on each side, 540 PTO, Runs and Drives

Front Tires 5.50-16, Rear Tires 13.6-28 Like New, Power Steering, Runs and Drives

Equipped with Allis Chalmers 400 Loader( Serial # 572136-2668), Three wheel weights on each side, Rear Tires 16.9-28, Front Tires 6.5-16, Repainted by Carl Vollmer and his Brother Mick. Runs and Drive

Diesel engine, Front Tires 20x8-10, Rear Turf Tires 13.6-16, 3-point, 540 PTO, Runs and Drives

1947 Allis Chalmers B with 4.00-15SL Front Tires and 9.-24 Back Tires
Woods Mower: Model L306-AC, SN: 0002484

Our research show this as a 1947 model, plaque on tractor show 1946. 

front tires: 5.00-15, Rears: 12.4-28 on 11-in rims. 

An Allis Chalmers C tractor frame featuring a single front wheel steer, hand-crank starter bracket, steering wheel column, and rear axle with orange wheel hubs. The lot includes two unmounted curved red metal fenders, a gear shift assembly cast with a "2 1 3 R" pattern, casting marks "4845" and "S-27", and rear tires including a Pul-N-Grip tread tire.

An orange-framed pull-type three-bottom moldboard plow assembly featuring grey painted shares, circular disc coulters, and a Goodyear Suburbanite Super Cushion 7.50-14 tubeless tire mounted on a steel wheel. 

E-Z-GO Golf Cart, Electric, Brand New Tires, Seats four, Rear seat flips down for work bed, Runs and Drive, Split windshield

A 2014 enclosed single-axle cargo transport trailer manufactured by United Trailers Inc., model XLV-612SA30-S. This unit features a gross vehicle weight rating (GVWR) of 2,990 lbs and is equipped with a Dexter axle, 15-inch wheels, and Carlisle ST205/75R15 tires. The trailer is configured with a rear ramp door, a side entry door, a wood-lined interior with D-ring tie-downs, an interior light, a manual tongue jack, and safety chains.

A Big Tex single axle open utility trailer featuring a wooden deck, side rails, a rear mesh ramp gate, and side-mounted spare tire. Equipped with an Atwood Mobile Products coupler rated for a 2-inch ball, safety chains, and a RAM 2000-series trailer jack with a 2,000 lb lift capacity. The trailer sits on Goodride ST205/75R15 tires with a matching spare tire mounted to the side rail. Model 355A

A Demco tow-behind utility sprayer featuring a yellow polyethylene tank, a red steel frame with an integrated hitch, and folding boom sprayer arms. This unit is equipped with a Remco ProFlo 12V DC demand pump (Model 90-3313-1E1-82B-SB) rated for 3.2 GPM and 60 PSI. Additional components include a Precision 0-60 PSI liquid-filled pressure gauge, an LDR ball valve assembly, a blue hand-sprayer wand hose, and Goodyear 13x5.00-6 tubeless tires mounted on red steel rims.

A Toro Wheel Horse Classic 312-8 Speed garden tractor, model 3112K802, serial number 1030945. The tractor is equipped with a Kohler Magnum 12 engine and a manual transmission. It features rear Turf Trac R/S 23x9.50-12 tires, front Hi-Run 15x6.00-6 tires, wheel weights and a Super Start U1LUH battery. A vintage dealer decal from Dennis Equipment Inc. of New Castle, Indiana is present on the console.

A Toro Wheel Horse 50-inch mid-mount grader blade attachment, featuring a red painted steel frame, dual spring-trip mechanism, and accompanying mounting hardware and adjustment linkage.

A Wheel Horse Products snow blower garden tractor attachment, model number 06-42ST05, serial number 50926. Manufactured in South Bend, Indiana, U.S.A. This unit features a red painted steel housing, a single-stage rotating auger, belt-driven pulleys with a belt marked 287ET, and a manual control linkage arm.

A red painted steel grading and scraper blade attachment designed for tractor mounting. The unit features a curved steel moldboard, dual heavy-duty trip springs, a long rectangular steel ladder frame assembly, and adjustment lever linkage.

A red-painted steel rotary mower deck manufactured by Wheel Horse Products Inc. of South Bend, Indiana. The unit features integrated mounting brackets, belt pulleys, safety warning decals, and belt installation diagrams. Marked with a safety certification plate referencing the ANSI B71.1-1984 standard. Equipped with attached guide wheels and roller bars.

A Kodiak brand 5-foot tractor rear scraper blade. Manufactured in Charleston, Tennessee, this implement features a three-point hitch mounting configuration and an adjustable pivoting angle adjustment plate. Marked with serial number 202513.

A Servis Model R900 three-point hitch tractor grader scraper blade, manufactured by Austin Products Inc. of Dallas, Texas. The unit features an adjustable angled rear blade and is marked with serial number 004581.

A heavy-duty agricultural tractor pallet fork attachment finished in orange paint. The implement features two adjustable steel fork tines, a three-point style mounting frame, and a central drawbar tongue equipped with a heavy steel tow eye. Suitable for farm operations and material handling.

A heavy-duty steel loader bucket manure fork attachment featuring a red painted finish and seven front-pointing tines secured along the lower lip. The rear of the unit is equipped with mounting brackets and pin receivers for connection to a compatible tractor front-end loader or skid steer. A small metallic plate on the upper rear corner is marked "U.S. PATENT".

A McKee Sno-Lander three-point hitch tractor-mounted snow blower. This agricultural implement features a power take-off (PTO) drive shaft, an integrated rotary auger system, and an adjustable directional discharge chute.

A pair of aluminum loading utility ramps. Features an open-rung design with central integrated safety tie-down straps, designed for loading ATVs, lawn tractors, or light equipment onto trucks and trailers.

A ShelterLogic RT Series 10' x 20' Premium Canopy, Model 30522. Features an 8-leg design constructed with a heavy-duty 1 3/8-inch diameter all-steel frame finished with a premium powder coat. Includes a triple-layer ripstop heat-sealed polyethylene cover featuring Twist-Tite tensioning.

A Werner professional grade aluminum telescoping multi-position ladder, rated for a 300-pound Type IA duty capacity. The lot includes a Werner aluminum static safety hinge adapter scaffolding kit housed in its original black molded plastic carrying case, complete with the original instruction manual, safety hinge plates, and adjustment tools.

A vintage Keller folding six-foot aluminum step ladder. The unit features an A-frame configuration with ribbed steps, a top platform, a fold-out metal paint bucket shelf, and metal spreader braces.

A Werner single-sided step ladder constructed from blue fiberglass rails with aluminum rungs. The unit stands approximately 8 feet (96 inches) in height, featuring a black plastic top cap with integrated tool slots and the Werner manufacturer mark, metal spreader bars, and slip-resistant feet.

A pair of utility loading ramps constructed of heavy wooden planks fitted with aluminum Reese ramp kit ends. The metal components feature cast-in safety warnings and are rated for a maximum load capacity of 700 pounds per ramp. The units measure approximately 65 inches in total length.

A set of four galvanized steel utility stakes manufactured by Stier Steel. Each stake features a loop hook top and a flat, pointed spade-style base. Made in the U.S.A. Measures approximately 36 to 37 inches in length. UPC 790480532893.

A pair of vintage galvanized steel utility trash cans, including one lid featuring a central handle.

A white metal liquid petroleum (LP) propane cylinder. The collar is stamped with specifications including TC-4 AM16 M4875, WC-32.6L capacity, and T-10.6 KG tare weight. Features an Overfill Prevention Device (OPD) valve with a threaded brass connection and a protective plastic cap strap. The body features bilingual English and French safety warning labels for UN 1075 propane gas.

A utility lot comprising a heavy-duty textured black polyethylene tarpaulin, a white polyethylene tarpaulin with integrated metal grommets, and a green polyethylene tarpaulin with integrated metal grommets. The grouping includes a grey plastic five-gallon Sherwin-Williams bucket containing an assortment of elastic bungee tie-down cords with hooks.

Two boltless steel rivet rack shelving units featuring adjustable heights and wood board decking. Designed for garage, workshop, or barn utility storage.

An Echo model PB-250 gas-powered handheld leaf blower. The unit features an integrated top carrying handle, manual pull-start mechanism, and a black blower nozzle assembly with rotational control decals. Technical markings indicate a noise rating of 68 dB(A) Category II per ANSI B175.2 standards.

An Echo gas-powered straight shaft string trimmer. Features a loop handle, a slide stop switch, and a protective debris guard. The engine casing retains a service label from Dietsch Electric Repair of Edgerton, Ohio.

A Hitachi model C12FDH 12-inch dual bevel compound miter saw with laser guide, featuring dual pivoting fences, micro bevel adjustment, and a 15-amp motor rated at 120V, 1520W, and 4,000 RPM. The unit is mounted to a custom plywood and steel-frame mobile work table equipped with swivel casters.

A pair of wooden workshop sawhorses featuring red and orange paint overspray, accompanied by a rectangular painted plywood panel. The sawhorses measure approximately 35 to 36 inches in length and stand approximately 24 inches in height.

A collection of utility storage vessels comprising one blue plastic open-top barrel drum, one dark green Rubbermaid Brute round utility container, one large green rectangular plastic utility tub, and one Libman 3.5-gallon plastic utility bucket with a green handle.